INSTRUMENTATION
 
 
 
 
 
 
   
900 DP 900 DB    
 
 
 

    ANY MECHANICAL
    FLOW METER
    CONVERTED TO
    ELECTRONIC
    INTER FACE WITH
    BILLING PRINTER

 

 
 
 

Copyright 2011 Al KHAIL ALARABI TRADING

 
 

FORK LEVEL SWITCH

  • Ambient Temperature 25~60ºC
  • Fork Body Material: Copper Alloy or SS
  • Power Supply :AC220V50Hz/DC24V
  • Consumption: 1.5W
  • Output Signal: 2 Groups Of NC /NO
  • Contal: Contact Capacity : 220VAC 5A/24VCD 10A
  • Maximum Outline Of Material Grain: ≤10mm
  • Maxium Pressure in Vessel: 1.0MPa
  • Working Temperature in Vessel: - 20~ 200ºC
  • Vibra Tion Freguency of Tuning Fork: about 200 Hz
  • Amplitube of vibration at Tipk : about 0.5mm Damp Time Delay about 2S

PRESSURE TRANSMITTER

  • Range: 0.2bar-3000bar
  • Accuracy: 0.5% 1%
  • Reliability :0.05% FS
  • Output: 4-20Ma/0-5V/0-10V
  • Power Supply: 12-36VDC
  • Work Temp.-40-80Celsium Degree
  • Overload Pressus: 150% FS
  • Material: SS/ Harbening Aluminium
  • Electric Connenction: DIN/M 12/gland Cable
  • Preocess Connection : G1/4,G1/2,1/2NPT, 1/4NPT, M12*1.5

PRESSURE TRANSMITTER

  • Range: 0.2bar-3000bar
  • Accuracy: 0.5% 1%
  • Reliability :0.05% FS
  • Output: 4-20Ma/0-5V/0-10V
  • Power Supply: 12-36VDC
  • Work Temp.-40-80Celsium Degree
  • Overload Pressus: 150% FS
  • Material: SS/ Harbening Aluminium
  • Electric Connenction: DIN/M 12/gland Cable
  • Preocess Connection : G1/4,G1/2,1/2NPT, 1/4NPT, M12*1.5 Explosion proof (optional)

VACUUM GAUGE

  • Range: 0.2pa - 10Kpa
  • Output 4-20Ma/0-15VDC/rs232 with a Nickel based alloy diaphragm
  • Material: Stainless Steel
  • Accuracy: 0.25%/0.5%
  • Quick response
  • Excellent overload capability

DIFFERENTIAL PRESSURE TRANSMITTER

  • Temperature range: Electronic wire: -40~+85ºC
  • Sensing element (filled with silicone oil) -40~+104ºC
  • Storage temperature: -40~55ºC
  • Start time: At max. damping <2s
  • Solvent uptake: <16cm3
  • Accuracy:±0.075%, ±0.1%, ±0.25
  • Process Connection: M20*1.5/1/2NPT/1/4NPT
  • Power supply: 12 ~ 45VDC
  • Output: 4~20Ma/Hart (optional)

PRESSURE GAUGE

  • Range: -0.1--0MPa, 0.1--100MPa
  • Table glass plexiglass, secure double glazing
  • Filling material: 98%glycerin (Silicone oil)
  • Protection rating: IP 65
  • Liquid~ filled type: 0~140ºF
  • Normal: 40 ~ 140ºF
  • Connection M20 x 1.5/1//2 NPT
  • Type: radial/axial
  • Memnrane type(optional)
  • Material. SS304/SS316(optional)

BIMETALLIC THERMOMETER

  • Scale nominal diameter: 100
  • Response time: ≤40s
  • Anti-explosion class: DIIBT4
  • Rated Power: 10VA
  • Max. working voltage: 220V
  • Max. working current: 0.7A
  • Accuracy: 1.5
  • Connection: M20 x 1.5/1/2 NPT
  • Temperature: -80-500(optional)
  • Anti-Explosion(optional)
  • Response time: ≤40s Proof
  • Pressure for protective tube: 6.3 MPa

FLOAT LEVEL CONTROLLER

  • Protection class : dlllBT4
  • Medium Pressure: 1.0MPa
  • Medium temperature(ºC): normal ≤100ºc /High-temp: ≤350ºC
  • Net weight: 1.5-2.0kg
  • Switch difference(mm): ≤8
  • Tuning method: Not adjustable
  • Installion type: Horizontal installation
  • Power and contact capacity and working life (optional): AC: 220V/1.5A, 110V/2.5A
  • Dc: 24V2.5A. 240V/0.5A working life: 5x100ˆ2

FLOAT LEVEL SWITCH

  • Rating current and voltage: 10(8A)250V-
  • 10(4A)380V
  • Rating Power: 1KW
  • Working temperature:-20ºC-170ºC
  • Accuracy: ±0.05m
  • Working pressure: 1atm, Medium: rising,
  • Sewage, Oil
  • Cable lenght: standard is 5cm(can customize
    in other lenght)
  • Contact capacity: 10A/250VAC
  • Material: SS304

FLOAT LEVEL SWITCH

  • Response time: 90% <2min (room temperature) 95%<5min (room temperature)
  • Range: 0.05 ~ 20ppmHOCI
  • Measurement: HOCI/residual cholorine
  • Operating temperature: 2 ~ 45ºC
  • Min velocity: 200~250ml/min, flow~through flow can not less 30L/h
  • pH range: 4 ~ 8.2pH
  • Proof pressure range:0 ~1bar
  • Measurement system consists of Controller,
  • Chlorine electrodr, PH electrode.
  • Electrode material: SS316L, POM diaphragm cap, PTFE diaphragm

ULTRASONIC FLAW DETECTOR

  • Range: (0~9000)mm
  • Bandwidth: (0.5~10)MHz
  • Material velocity: (1000-9999)m/s
  • Dynamic Range: ≥32dB
  • Vertical linear error:≤3%
  • Vertical linear error: ≤0.2%
  • Resolution:>40dB(5P14)
  • Sensitivity Leavings: 60dB(flat-bottomed deep hole 200Ø2)
  • Rejection: 0 to 80)% Linear
  • Noise level:≤10%
  • Power supply: DC 9V, lithium batteries work for 4 to 8 hours or more
  • Ambient temperature: (~20~50)ºC LCD display

PADDLE FLOW SWITCH

  • Diameter: DN25 to DN150
  • Set range: 20---1800L/min(water)
  • Repeatability: ±2.5%FS
  • Connection: terminal type
  • Output: Mechanical switch NO+NC(250VAC,3A)
  • Pressure Proof: 16 bar
  • Average pressure loss: 0.08bar(at max. flow rate)
  • Ambient temperature: -25~80ºC
  • Medium temperature: 0-120ºC
  • Interface screw: G1" pipe screw

PISTON FLOW SWITCH

  • Accuracy: ±5%FS
  • Delay: Depend on the switch point, min point 0.6L/Min LED display
  • Connection: M12
  • Output: Reed switch, capacity 24VDC/250VAC,100mA
  • Pressure proof: 10bar(plastic), 50bar(aluminum),
  • 100 bar (stainless steel)
  • Average pressure loss: 0.3bar(at 25L/min)
  • Medium temperature: Max.90 celsius degree
  • Protective class: lp65
  • CXFE40...GP material: Housing:POM plastic,
  • Piston: POM plastic
  • Reed switch: stainless steel
  • Seal : NBR
  • Application: Gas, Liquid

THERMAL DIFFERENTIAL FLOW SWITCH

  • Set range: 1...150cm/s(water).3...300cm/s(oil) 20...200cm/s(air)
  • Output PNP, NPN, Relay, NO+NC (SPDT)
  • Power supply: 24V ±20%DC
  • Switching Current: Max: 400mA(PNP or NPN type)
  • Max.4A(Relay type)
  • Unload current: Max. 80mA
  • Flow indicator :LED (6)
  • Set type: Potentiometer set
  • Proof pressure range: 100bar
  • Response time: 1--13s, standard is 2s
  • Medium temperature: ~20~~80ºC
  • Connection: M12 connector / 2m cable (optional)
  • Material: Probe is stainless steel, Housing is PBT.

FLOW TOTALIZER

  • Analog input Resistance Pt100
  • Voltage: 0~5V, 1~5V or mV
  • Current: 0~10mA, 4`20mA or 20mA
  • Thermocouple: K,E
  • Pulsse input: Wave, Rectangular, sine or tringle wave
  • Amplitude: more than 4V (or specified by user)
  • Range: 0 ~ 5KHz
  • Switch input: Start, Stop, Reset
  • Analog output: 0~10mA (≤750Ω).4~20mA (≤500Ω).0~5V≤250Ω) .1~5V≤250Ω
  • Switch output: Relay controlling output (AC220V/3A, DC24V/5A, resistance load)
  • Feed output: DC24V/30mA
  • LED display
  • EVC function (optional)

PAPERLESS RECORDER

  • Channel up to 48
  • Input: Current, low voltage
  • Thermal resistance, Thermocouple
  • Output Current, Communication,
  • USB Interface, Alarm
  • Accuracy, Real-time display:±0.2%F.S.
  • Record intervals: 11 intervals from1 to 240sec.
  • Record capacity: 64/128/192/248MB
  • Screen: 5.6 inch true color TFT LCD
  • Blue screen and Color screen (optional)
  • Power supply: 85~265VAC, 45~65GH
  • Temperature: 0 to 45ºC
  • Humidity: 10%~85%RH(non-condensing)

THERMOCOUPLE

  • Materoa: Stainless Steel
  • RTD Graduation
  • PT10/PT100/PT1000/Cu50/Cu100
  • Thermocouple Graduation: B/R/S/K/N/E/J/T
  • Tempearuare range: 0-1800 Celsius degree
  • Basic Error: 0.5%FS, 0.2FS, Intellectual
  • Type 0.2%FS
  • Output: 4~20mA, 0~10Ma
  • Wear- resistand protection(optional)
  • Application: Temperature measurement
  • Explosion proof function(optional)

ULTRASONIC WATER METER

  • Size DN15~100m
  • Flow range(m3/H): 0.0238~740
  • Accuracy: 1%, 2%
  • Repeatability: 0.5%
  • Measuring period: 3S, 1~3S, 1~31S(selection)
  • Battery can work 6~10years, or two line power
  • Lowest measuring velocity of liquid 0.01m/s
  • Protection class: IP68,
  • Foundry in mould, no reveal
  • Ceramic sensor apply to -40~160
  • Over look type, normal type, separate type

DIGITAL WATER METER

  • Size DN15~300
  • smart structure
  • LCD display
  • Flow range(m3/H): 0.03~3
  • Temperature up to 100C
  • Pressure: 1.6MPa
  • pulse output / RS485 interface / M-BUS
  • communication Li-battery supply

ULTRASONIC LEVEL METER WITHOUT DISPLAY

  • Medium liquid
  • Type: 3-wire
  • Voltage: 0~5V or 1~5v (default 0~5V)
  • Current: 0~20mA or 4~20mA (default 4~20mA)
  • Interface: RS 485, RS232, RS422(default RS485
  • Max. range: 15m (optional, larger can be customized)
  • Blanking ditance: less than 500mm (its up to the measuring range)
  • Voltage: DC 12V/24V (optional)
  • Beam angle: 9/15(15 default)
  • Temperature: normal temperature

ULTRASONIC LEVEL METER LOCAL DISPLAY

  • Voltage Dc 12V/, DC 24V (optional)
  • Max. Measuring range: 50m
  • Medium: liquid
  • Shows: 4 digit and 8 segment 0.39 inches
  • LED, 4 indicators lamp
  • Data output: 4~20mA anlog output, 0~5V /1~5V or serial data output
  • Working temperature 0~50ºC, -10~60ºC -30~8ºC optional
  • Storage temperature: -40ºC~85ºC
  • Accuracy: 0.25%-0-5%FS

SMALL BLIND AREA ULTRASONIC LEVEL METER

  • Max sending range:0.6/1m(optional)
  • Unsusable area:<0.06m
  • Emission angle: 9º
  • Max measure error: 1.5mm
  • Transducer frequency: 40KHz ~430.0KHz
  • Display resolution: 1mm
  • Display: 4 figure 8 segments LED(LCD available)
  • Power: DC 12~30V Power consumption:<1.5w
  • Output signal: 4~20mA or RS485
  • Fix model: M48 screwing
  • The material: PP, ABS
  • Ambient temperature: -20ºC~60ºC
  • Ambient pressure: normal condition
  • Humidity: 0 to 95%

REMOTE ULTRASONIC LEVEL METER

  • Supply power: 12/24V Measuring Liquid
  • Level: 0-10M, 0-12M,0-15M
  • Voltage: 0~5V or 1~5V
  • Current 0~20mA or 4~20mA
  • Relay: 1~4points 220V/2A relay output
  • Interface RS485, RS232 working parameter of the sensor
  • Working temperature: 0~50ºC (-10~60ºC/- 20-70ºC optional)
  • Storage temperature: -40~80ºC
  • Blanking distance: <=300500mmat 25
  • Precision: 0.025-0.5%FS
  • Beam angle: 15(default),12,9,5
  • Working pressure: The atmosphere, can customized to 0.1MPa.
  • Anti-explosion grade: ExAT3 (default Non-explosion-proof)

ULTRASONIC LEVEL METER

  • Measuring range: 5M, 8M, 10M
  • Dead band: <0.3-0.5m
  • Work frequency: 20KHZ-200KHZ
  • Output signal : 4~20mA
  • Output impedance: 1KΩ
  • Display resolution: 1mm
  • Measure precision: ±0.3% x Full scale
  • Work pace A.P: normal codition
  • Display device: 0.5 inch LCD
  • Type: 3-wire/2-wire

RADAR LEVEL METER

  • Measuring 20m/35m (can customer)
  • Process connection: screw/flange
  • Process temp:130C/150C/250c
  • Process pressure: 3 bar/20bar/40bar
  • Repeatability: +/-3mm
  • Precision: <0.1%
  • Resolution: 1mm
  • Protective class:IP68
  • Frequency: 6,8GHz LCD dusplay
  • Output4-20Ma/Hart(optional)
  • Type: intellgent/guided wave type

RADAR LEVEL METER

  • Level range: up to 3m
  • Wet material: S304/316L/PP/UPVC/ABS
  • Temperature: 100C/120C/150C/350C
  • Pressure: 2.45Mpa/9.6Mpa/0.6Mpa/1.6Mpa
  • Installation: side- mounted/top-mounted
  • Float: red and white color
  • Alaram function (optional)
  • Corrosive function(optopnal)
  • Application : Liquid

WATER METER

GMD X multi jet dry dial

  • Class B-H/A
  • Cold water 30ºC
  • Direct reading on numbered rolls
  • Reading=100,000 Cubic meters
  • Magnetically driven
  • Working pressure 16 bar & 50 available with flanges as well

WATER METER

WDEK30 Woltmann type

  • Class B-H
  • Cold water 30ºC
  • Direct reading on numbered rolls
  • Reading=100,000 Cubic meteres & 504 125
  • Reading=100,000 Cubic meteres & 160 4 300
  • Reading=100,000 Cubic meteres & 504 125
  • Magnetically driven
  • Impulse reading device (on request)
  • Working pressure P N 16